×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CUCM to Nortel BCM - H323

Unanswered Question
Feb 3rd, 2010
User Badges:

Has anyone had any luck with using an H.323 trunk between CUCM and a Nortel BCM?  Everything I've read seems to indicate that this is difficult to get going and to use SIP/TDM instead but I'm wondering if anyone out there has any success stories/lessons learned they could share.


Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Thu, 02/04/2010 - 05:48
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi J,


Perhaps this doc may help (the basic concepts should carry over);


Nortel Communication Server 1000M Release 4.0 using H.323

Trunk to Cisco Unified CallManager Release 4.1(2)


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/445274no.pdf



I wish that I had some "first-hand" knowledge for you, but we use DMS100 PRI's

between the Nortel and CUCM




Hope this helps!

Rob

Actions

This Discussion

Related Content