cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
933
Views
10
Helpful
4
Replies

CME and 7912 IP Phone question

infosateng
Level 1
Level 1

Hi All

Is it possible for a 7912G IP Phone to have a Primary Number and also a shared number with multiple phones.  I want each phone to have its own extension, but multiple phones to ring for a specific number.

Thanks

1 Accepted Solution

Accepted Solutions

Hey there,

I'll try and fill in for Paolo for a moment (+5 "P")

Shared-Line Overlays

Dual-line ephone-dns can also use overlays. The configuration parameters are the same as for single-line ephone-dns, except that the huntstop channel command must be used to keep calls from hunting to the ephone-dn's second channel.

The primary ephone-dn in a shared-line overlay set should be unique to the phone to guarantee that the phone has a line available for outgoing calls, and to ensure that the phone user can obtain dial-tone even when there are no idle lines available in the rest of the shared-line overlay set. Use a unique ephone-dn to provide for a unique calling party identity on outbound calls made by the phone so that the called user can see which specific phone is calling.

Shared-line Overlaid Ephone-dns: Example

The following is an example of a unique ephone-dn as the primary dn in a simple shared-line overlay configuration. The no huntstop command is configured for all the ephone-dns except ephone-dn 12, the last one in the overlay set. Because the ephone-dns are dual-line dns, the huntstop-channel command is also configured to ensure that the second channel remains free for outgoing calls and for conferencing.

ephone-dn 1 dual-line

number 101

huntstop-channel

!

ephone-dn 2 dual-line

number 102

huntstop-channel

!

ephone-dn 10 dual-line

number 201

no huntstop

huntstop-channel

!

ephone-dn 11 dual-line

number 201

no huntstop

huntstop-channel

!

ephone-dn 12 dual-line

number 201

huntstop-channel

!

!The following ephone configuration includes (unique) ephone-dn 1 as the primary line in a shared-line overlay

ephone 1

mac-address 1111.1111.1111

button 1o1,10,11,12

!

!The next ephone configuration includes (unique) ephone-dn 2 as the primary line in another shared-line overlay

!

ephone 2

mac-address 2222.2222.2222

button 1o2,10,11,12

From this good CME doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmecover.html#wp1099687

Cheers!

Rob

View solution in original post

4 Replies 4

paolo bevilacqua
Hall of Fame
Hall of Fame

Yes, overlay DNs.

Hello

Do you have a basic config.  I've added a second DN to 2 phones and it olny rings on one.

Thanks

Hey there,

I'll try and fill in for Paolo for a moment (+5 "P")

Shared-Line Overlays

Dual-line ephone-dns can also use overlays. The configuration parameters are the same as for single-line ephone-dns, except that the huntstop channel command must be used to keep calls from hunting to the ephone-dn's second channel.

The primary ephone-dn in a shared-line overlay set should be unique to the phone to guarantee that the phone has a line available for outgoing calls, and to ensure that the phone user can obtain dial-tone even when there are no idle lines available in the rest of the shared-line overlay set. Use a unique ephone-dn to provide for a unique calling party identity on outbound calls made by the phone so that the called user can see which specific phone is calling.

Shared-line Overlaid Ephone-dns: Example

The following is an example of a unique ephone-dn as the primary dn in a simple shared-line overlay configuration. The no huntstop command is configured for all the ephone-dns except ephone-dn 12, the last one in the overlay set. Because the ephone-dns are dual-line dns, the huntstop-channel command is also configured to ensure that the second channel remains free for outgoing calls and for conferencing.

ephone-dn 1 dual-line

number 101

huntstop-channel

!

ephone-dn 2 dual-line

number 102

huntstop-channel

!

ephone-dn 10 dual-line

number 201

no huntstop

huntstop-channel

!

ephone-dn 11 dual-line

number 201

no huntstop

huntstop-channel

!

ephone-dn 12 dual-line

number 201

huntstop-channel

!

!The following ephone configuration includes (unique) ephone-dn 1 as the primary line in a shared-line overlay

ephone 1

mac-address 1111.1111.1111

button 1o1,10,11,12

!

!The next ephone configuration includes (unique) ephone-dn 2 as the primary line in another shared-line overlay

!

ephone 2

mac-address 2222.2222.2222

button 1o2,10,11,12

From this good CME doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmecover.html#wp1099687

Cheers!

Rob

What have you added and how? Must post your config.

Also remember to type restart under ephone after making changes.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: