02-04-2010 06:17 AM - edited 03-15-2019 09:18 PM
Hello to everyone,
Would be great help if anyone guide me to find out SCCP version in CUCM 7.0 ?
regards
siva
Solved! Go to Solution.
02-04-2010 06:28 AM
02-04-2010 06:28 AM
02-04-2010 11:31 PM
Thank you so much Brandon for your quick response.
shiv
07-14-2010 01:13 PM
The version of SCCP is not determined by the CUCM, it's actually determined by whatever Firmware is loaded on the phone. If you want to find out what version of SCCP a phone is running, the best way I found was to create a test CME lab. Once the phone is registered with CME, then do a 'show ephone' command and it will display the SCCP version that phone's firmware is communicating with. The output looks like this:
ephone-1 Mac:XXXX.XXXX.XXXX TCP socket:[1] activeLine:0 REGISTERED in SCCP ver 17 and Server in ver 5
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
IP:X.X.X.X 23648 7911 keepalive 132 max_line 2 dual-line
button 1: dn 1 number 2001 CH1 IDLE CH2 IDLE
**Note: This command also works when phones are in SRST fallback mode, and you will see the version of SCCP as well.
The article from the previous post says to use a packet sniffer, but I tried it and didn't work. This method worked better for me.
As of CUCM 7.1(3), the latest firmware for most phones is 8.5(3) which does run SCCP version 17. But if you download the latest firmware for some phones, they are running SCCP version 19!
Hope this helps,
neocec
08-12-2010 02:51 AM
I need a firmware the runs SCCP v3.3.2 to allow my ASA to inspect
it.
Do you know one that is compatable with CUCM v7?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide