Router and Anyconnect for Public Internet on a Stick

Unanswered Question
Feb 6th, 2010

Instead of using the traditional Cisco VPN client software, how to configure this in router with Anyconnect (IOS SSLVPN)?

Ref(Cisco VPN Client): http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_configuration_example09186a008073b06b.shtml

I tried to modify the above using webvpn. But I can only access the internal network, not Internet. Any idea?

webvpn gateway gateway1
ip address 172.16.1.1 port 443
ssl trustpoint TP-self-signed-743123231
inservice
!
webvpn context context1
ssl authenticate verify all
!
policy group policy1
   functions svc-enabled
   svc address-pool "vpnpool"
   svc keep-client-installed
default-group-policy policy1
aaa authentication list localuser
gateway gateway1
inservice

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ricardo Prado Rueda Mon, 02/15/2010 - 06:29

Hi Raymond,

   From your description it seems you do not want to configure split-tunneling to get access to the Internet at the Client's site. Have you configured the NAT on a Stick setup that the link describes to use the tunnel to get Internet access?

Regards,

Rick.

Actions

This Discussion