Dear All,
I am getting this error while connecting to ASDM Please help.
Your ASA Image has a version number 8.2.1 which is not supported by ASDM 6.1(3)
Show Version.....
User Access Verification
Password:
Type help or '?' for a list of available commands.
ASA-PT> en
Password:
ASA-PT# show ver
Cisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.1(3)
Compiled on Tue 05-May-09 22:45 by builders
System image file is "disk0:/asa821-k8.bin"
Config file at boot was "startup-config"
ASA-PT up 12 days 0 hours
Hardware: ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Ext: GigabitEthernet0/0 : address is 0024.14d2.1582, irq 9
1: Ext: GigabitEthernet0/1 : address is 0024.14d2.1583, irq 9
2: Ext: GigabitEthernet0/2 : address is 0024.14d2.1584, irq 9
3: Ext: GigabitEthernet0/3 : address is 0024.14d2.1585, irq 9
4: Ext: Management0/0 : address is 0024.14d2.1581, irq 11
5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
<--- More --->
Thanks
Tabrez
