02-08-2010 09:22 AM - edited 07-03-2021 06:29 PM
Hi, I can configure wireless client authentication using the user local database in the ACS, whitout use LEAP Authentication? (The devices of this wifi solution, are WLC 2106 and ACS 4.2).
Thanks
02-08-2010 09:29 AM
Sure, you could create the user account locally on ACS and use EAP-FAST or PEAP as your authentication method.
02-08-2010 11:53 AM
Thanks.
To configure the solution, I need to complete this Steps?:
1. Add users in the ACS (User Setup section)
2. System Configuration / Global Authenticacion Setup / Enable the EAP Configuration in the ACS.
There is someone guide with example ¿?
Thanks
02-08-2010 01:06 PM
Start here ...
Chapter 6 - Configuring WLANs
http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60wlan.html
02-08-2010 06:36 PM
I understand the configuration of the WLAN , my doubt is about the configuration o precedure to configure the ACS.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: