ACS Authentication WiFi Users

thomas19991 · ‎02-08-2010

Hi, I can configure wireless client authentication using the user local database in the ACS, whitout use LEAP Authentication? (The devices of this wifi solution, are WLC 2106 and ACS 4.2).

Thanks

dancampb · ‎02-08-2010

Sure, you could create the user account locally on ACS and use EAP-FAST or PEAP as your authentication method.

thomas19991 · ‎02-08-2010

Thanks.

To configure the solution, I need to complete this Steps?:

1. Add users in the ACS (User Setup section)

2. System Configuration / Global Authenticacion Setup / Enable the EAP Configuration in the ACS.

There is someone guide with example ¿?

Thanks

Leo Laohoo · ‎02-08-2010

Start here ...

Chapter 6 - Configuring WLANs
http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60wlan.html

thomas19991 · ‎02-08-2010

I understand the configuration of the WLAN , my doubt is about the configuration o precedure to configure the ACS.