Issues Connecting HWIC-3G-GSM to AT&T

Unanswered Question
Feb 8th, 2010

I am difficulty connectng to AT&T with an HWIC-AP-G-A. I am able to update the PRL, but not connect. I have upgraded the firmware on the WIC. What am I doing wrong?

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.02.08 12:22:23 =~=~=~=~=~=~=~=~=~=~=~=
sh run | i alias
alias exec br sh ip int brie
alias exec prl start-chat prl 0/3/0
alias exec gsm start-chat gsm 0/3/0
My-2801#prl
My-2801#ter mon
My-2801#sh debug


Chat Scripts:
  Chat scripts activity debugging is on
My-2801#prl

*Feb  8 17:33:59.577: CHAT0/3/0: Matched chat script prl to string prl
*Feb  8 17:33:59.577: CHAT0/3/0: Asserting DTR
*Feb  8 17:33:59.577: CHAT0/3/0: Chat script prl started
*Feb  8 17:33:59.577: CHAT0/3/0: Sending string: at
*Feb  8 17:33:59.577: CHAT0/3/0: Expecting string: OK
My-2801#
*Feb  8 17:34:02.825: %CELLWAN-2-MODEM_UP: Modem in HWIC slot 0/3 is now UP
*Feb  8 17:34:02.825: %CELLWAN-2-MODEM_DOWN: Modem in HWIC slot 0/3 is DOWN
*Feb  8 17:34:02.829: CHAT0/3/0: Carrier drop expecting OK
*Feb  8 17:34:02.833: CHAT0/3/0: Chat script prl finished, status = Carrier dropped
*Feb  8 17:34:13.317: %CELLWAN-2-MODEM_UP: Modem in HWIC slot 0/3 is now UP
My-2801#
My-2801#
My-2801#gsm
*Feb  8 17:34:43.233: CHAT0/3/0: Matched chat script gsm to string gsm
*Feb  8 17:34:43.233: CHAT0/3/0: Asserting DTR
*Feb  8 17:34:43.237: CHAT0/3/0: Chat script gsm started
*Feb  8 17:34:43.237: CHAT0/3/0: Sending string: ATDT*98*2#
*Feb  8 17:34:43.237: CHAT0/3/0: Expecting string: CONNECT
My-2801#
*Feb  8 17:35:43.237: CHAT0/3/0: Timeout expecting: CONNECT
*Feb  8 17:35:43.237: CHAT0/3/0: Chat script gsm finished, status = Connection timed out; remote host not responding
My-2801#sh run
Building configuration...

Current configuration : 1897 bytes
!
! Last configuration change at 23:12:06 UTC Sat Feb 6 2010
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname My-2801
!
boot-start-marker
boot system flash:c2801-advsecurityk9-mz.151-1.XB.bin
warm-reboot
boot-end-marker
!
logging buffered 10000 informational
enable secret 5 
!
no aaa new-model
!
dot11 syslog
ip source-route
!
!
!
!
ip cef
!
multilink bundle-name authenticated
!
chat-script prl "" "at" TIMEOUT 5 "OK" AT!ENTERCND="A710" TIMEOUT 5 "OK" AT!CUSTOM="PRLREGION",02 TIMEOUT 5 "OK" "AT!RESET"
chat-script abc ATDT*98 TIMEOUT 60 CONNECT
chat-script gsm "" ATDT*98*2# TIMEOUT 60 CONNECT
chat-script aaa "" ATDT*98*2# TIMEOUT 60 ""
!
!
!
!
file verify auto
!
redundancy
!
!
crypto ikev2 diagnose error 50
!
!
controller Cellular 0/3
!
!
!
!
!
!
!
!
interface FastEthernet0/0
ip address 192.168.2.33 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Cellular0/3/0
ip address negotiated
encapsulation ppp
shutdown
dialer in-band
dialer string gsm
dialer-group 1
async mode interactive
ppp ipcp dns request
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 192.168.2.1
ip route 4.2.2.2 255.255.255.255 Cellular0/3/0
!
access-list 1 permit any
dialer-list 1 protocol ip permit
!
!
!
!
!
control-plane
!
alias exec br sh ip int brie
alias exec prl start-chat prl 0/3/0
alias exec gsm start-chat gsm 0/3/0
alias exec aaa start-chat gsm 0/3/0 aaa
!
line con 0
line aux 0
line 0/3/0
exec-timeout 0 0
script dialer gsm
login
modem InOut
no exec
rxspeed 3600000
txspeed 384000
line vty 0 4
exec-timeout 1000 0
password 7
login
transport input all
!
scheduler allocate 20000 1000
end

My-2801#         
My-2801#


My-2801#sh cellular 0/3/0 all
Hardware Information
====================
Modem Firmware Version = H1_1_9_22MCAP C:/WS
Modem Firmware built = 12/12/07
Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) = 310410289663046
International Mobile Equipment Identity (IMEI) = 352678010367552
Integrated Circuit Card ID (ICCID) = 89014104232896630463
Mobile Subscriber International Subscriber
IDentity Number (MSISDN) = 1813*******
Factory Serial Number (FSN) = X28041704311016
Modem Status = Online
Current Modem Temperature = 26 deg C, State = Normal
PRI SKU ID = 4294967295, SKU Rev. = 65535.65535

Profile Information
====================
Profile password Encryption level: 7

Profile 1 = INACTIVE*
--------
PDP Type = IPv4
Access Point Name (APN) =
Authentication = None
Username: , Password: 11

* - Default profile

Data Connection Information
===========================
Data Transmitted = 0 bytes, Received = 0 bytes
Profile 1, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 2, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state

Network Information
===================
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = HSDPA (Attached)
Packet Session Status = Inactive
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = USA, Network = 'AT&T'
Mobile Country Code (MCC) = 310
Mobile Network Code (MNC) = 410
Location Area Code (LAC) = 27796
Routing Area Code (RAC) = 101
Cell ID = 47437
Primary Scrambling Code = 72
PLMN Selection = Automatic
Registered PLMN = AT&T , Abbreviated =
Service Provider =

Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 1900, Channel Number = 637
Current RSSI = -86 dBm
Band Selected = WCDMA/GSM NA
Number of nearby cells = 1
Cell 1
        Primary Scrambling Code = 0x48
        RSCP = -88 dBm, ECIO = -10 dBm


Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of Retries remaining = 3
My-2801#sh cellular 0/3/0 all
Hardware Information
====================
Modem Firmware Version = H1_1_9_22MCAP C:/WS
Modem Firmware built = 12/12/07
Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) = 310410289663046
International Mobile Equipment Identity (IMEI) = 352678010367552
Integrated Circuit Card ID (ICCID) = 89014104232896630463
Mobile Subscriber International Subscriber
IDentity Number (MSISDN) = 1813xxxxxxx
Factory Serial Number (FSN) = X28041704311016
Modem Status = Online
Current Modem Temperature = 26 deg C, State = Normal
PRI SKU ID = 4294967295, SKU Rev. = 65535.65535

Profile Information
====================
Profile password Encryption level: 7

Profile 1 = INACTIVE*
--------
PDP Type = IPv4
Access Point Name (APN) =
Authentication = None
Username: , Password: 11

* - Default profile

Data Connection Information
===========================
Data Transmitted = 0 bytes, Received = 0 bytes
Profile 1, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 2, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state

Network Information
===================
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = HSDPA (Attached)
Packet Session Status = Inactive
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = USA, Network = 'AT&T'
Mobile Country Code (MCC) = 310
Mobile Network Code (MNC) = 410
Location Area Code (LAC) = 27796
Routing Area Code (RAC) = 101
Cell ID = 47437
Primary Scrambling Code = 72
PLMN Selection = Automatic
Registered PLMN = AT&T , Abbreviated =
Service Provider =

Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 1900, Channel Number = 637
Current RSSI = -86 dBm
Band Selected = WCDMA/GSM NA
Number of nearby cells = 1
Cell 1
        Primary Scrambling Code = 0x48
        RSCP = -84 dBm, ECIO = -10 dBm


Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of Retries remaining = 3
My-2801#

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion