Configuring SNMP Trap receiver on AIP-SSM sensor

Unanswered Question

I receive the following error message from my ASA5520 firewall when attempting to forward SNMP traps from my AIP-SSM20 sensor to a server on my Inside interface that is configured to receive SNMP traps:

ASA-4-418001: Through-the-device packet to/from management-only network is denied: udp src management: 10.3.21.2/32768 dst Inside: PPC0ES/162


Can I reconfigure the management IP address of the AIP-SSM sensor to connect to the Inside interface instead of the management vlan or does my SNMP server have to reside on the management vlan with the sensor?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content