Sound issue on a Cisco IP Phone 7960 with a 7914 Expansion Module.

Answered Question
Feb 9th, 2010
User Badges:

Hi,

I have a CISCO IP Phone 7960 with a 7914 Expansion Module, so that the secretary can monitor and overview the persons that she has configured on the 7914 Expansion Module.

The only downside is that when a person calls one of the numbers that she has configured on the 7914 Expansion Module, and then her phone also rings.

Is there any way that I can configure her phone or expansion module, so her phone does not ring, if someone tries to call one of the persons on her list?

Instead of ringing, it should just flash red and yellow the button.

Kind regards,

Carl-Marius

Correct Answer by Rob Huffman about 7 years 2 months ago

Hi Carl-Marius,


You should be able to go to the individual DN settings for each

of the lines on the 7914 and change the Ring Setting (Phone Idle)

to Flash Only (from Brugsystemstandard).


Cheers!

Rob


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Tue, 02/09/2010 - 05:33
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Carl-Marius,


You should be able to go to the individual DN settings for each

of the lines on the 7914 and change the Ring Setting (Phone Idle)

to Flash Only (from Brugsystemstandard).


Cheers!

Rob


Carl-Marius.Steensen Thu, 02/11/2010 - 04:17
User Badges:

Hi Rob,


Thank you very much for the fast and precise answer, it worked!


Kind regards,

Carl-Marius

Actions

This Discussion

Related Content