I'm trying to assign a separate interface (VLAN) to the same SSID on different APs. For this I have defined a new dynamic interface with a new vlan, I also defined an additional AP group has the same default SSID but changing the interface that is assigned. I took an AP and I've assigned to that group, but when a client is associated on that AP, controller ignores the new interface and keeps it in the interface definied at SSID at default group.
Thanks in advance.
When using AP-Group vlan's do the following:
- Create the subnets in Controller > Interfaces
- Create the AP Groups Vlan in WLANs > Advanced > AP Groups Vlan coresponding to the newly created subnets
- When setting up the SSID, In the "General" tab select "Management" as the interface option.
- When configuring the AP pick the appropriate "AP Group Name" in the "Advanced" tab.
It looks to me like your issue is probably with Step #3.
Hope this helps.