Disable CDP on UC500 WAN port

Unanswered Question
Feb 9th, 2010

How can I disable CDP on my WAN port. Preferably CCA.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Marcos Hernandez Tue, 02/09/2010 - 09:49

There is no way to do this in CCA. You will need CLI:

UC500#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

UC500(config)#int fast 0/0

UC500(config-if)#no cdp enable



John Platts Tue, 02/09/2010 - 10:04

Remember that CDP should only be disabled on your UC500 WAN port if the WAN port is not connected to a SR520, SA520, or SA540. If your WAN port is connected to a SR520, SA520, or SA540, CDP needs to be enabled on the UC500 WAN port for CCA to work properly.


This Discussion