help setting up vpn tunnel and routing

Unanswered Question
Feb 9th, 2010
User Badges:

I've set up a VPN tunnel between a 7206 router, and a rv042 vpn router. The tunnel connects, but no traffic passes.


I'm assuming this is because I need to tweek NAT, ACL, routing, etc.


I'm testing this setup out right now, but here's how it would go.


Internet via ethernet into fasteth0/0 on dhcp(works, gets an IP)

Tunnel to rv042 via fasteth 2/0(tunnel connects)

Host on switch of RV042 needs to connect over VPN tunnel to be able to get online.


Is there any guides that would help me out?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ganesh Hariharan Wed, 02/10/2010 - 00:49
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

I've set up a VPN tunnel between a 7206 router, and a rv042 vpn router. The tunnel connects, but no traffic passes.


I'm assuming this is because I need to tweek NAT, ACL, routing, etc.


I'm testing this setup out right now, but here's how it would go.


Internet via ethernet into fasteth0/0 on dhcp(works, gets an IP)

Tunnel to rv042 via fasteth 2/0(tunnel connects)

Host on switch of RV042 needs to connect over VPN tunnel to be able to get online.


Is there any guides that would help me out?


Hi,


Check out the below link hope that help


http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009438e.shtml


Ganesh.H

Actions

This Discussion