H-reap ap´s not coming back to the controller.

Unanswered Question
Feb 10th, 2010
User Badges:

I have a problem with the H-reap ap´s to come back to the controller.

1 - The ap goes into the H-REAP mode after a wan failure

2 -  Them after the wan link comes back the ap does not register back to the controller, that just works after ap´s are rebooted locally.


Ap: 1242ag

WLC: 4404 - Firmware 5.0.148.2

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Wed, 02/10/2010 - 17:16
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Upgrade to 6.0.182.0 or later and verify.

mario-leitao Fri, 10/01/2010 - 12:42
User Badges:

We found that the command ip icmp redirect was configured on the router´s interface and after we disable this feature the problem stopped.

Actions

This Discussion