I have a 2801 router. I inserted a VWIC2-1MFT-T1/E1 card. I configured it on a CUCM 7.1 by adding a new gateway using MGCP (I want it work using QSIG).
On the router I inserted the following commands:
no ip domain-lookup
ccm-manager config server 172.17.7.5
After inserting these commands I could see the following debug:
Loading MU-GW-2801.cnf.xml from 172.17.7.5 (via FastEthernet0/0): !
[OK - 4749 bytes]
*Feb 10 11:43:57.786: %SYS-5-CONFIG_I: Configured from console by admin on console
This package type is not the default package type.
isdn switch-type primary-4ess
% Invalid input detected at '^' marker.
Could anyone help on what is the matter? I have tried several IOS:
I thought it could be that the command was not supported. But, none of these IOS worked.
Thank you very much,