Help with getting ASA 5505 on the Internet

Unanswered Question
Feb 10th, 2010

Hello,

I am setting up a ASA 5505 in a remote office and then create a VPN to our HQ.  Normally I get given an external public IP address for the outside interface of the ASA and another external public IP address for the gateway so I can route all traffic to a router (route outside 0.0.0.0 0.0.0.0 1.2.3.4 1).

However a this new office (which is a service managed office) they have provided me with the following IP info:

IP x.26.49.134
subnet 255.255.255.252
gateway x.26.49.134
DNS 158.43.128.72
DNS 195.129.12.115

The IP address and gateway are the same, is this right?  The subnet mask suggests to me that there are 2 IP address in the subnet (one for the ASA and one is the router/gateway).  They say it's right, do I give the outside address of the ASA the x.26.49.134 and do I route the traffic to x.26.49.134 - route outside 0.0.0.0 0.0.0.0 x.26.49.134 1

Hope you can shed some light.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bthompson001 Wed, 02/10/2010 - 11:11

You definitely don't want your ASA's IP address to be the same as the Gateway's. Give the ASA the other IP and route the traffic to .134

Actions

This Discussion