Appendix C: Noise Immunity NMdiff

Unanswered Question

I have a question on the formula used for NMdiff in appendix C. When I run through the math I get 212mV not 316mV. The result is 316mV prior to subtracting the Vid_min of 150mV. My question is what is the NMdiff value 316mV or 212mV?


Secondly if the NMdiff is 212mV or 316mV how can this be since the minimum differential input voltage Vid_min is 150mV? The noise margin is greater than the signal level (150mV)

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Thu, 02/11/2010 - 12:15
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Mike,

appendix C of what ?


provide a context for your question (what technology and what standard are you referring to)


Hope to help

Giuseppe

Oops sorry about that I though tI was in a HSSI forum when I posted the

question. This is Appendix C of the HSSI specification:


http://www.cisco.com/en/US/products/hw/routers/ps341/products_tech_note0...


Mike DeVita

Staff Engineer

Application Engineering and Characterization

Amkor Technology

VM (480) 821-2408 EXT 5021

EM [email protected]




From: giuslar

To: Mike DeVita/CHAZ/[email protected]

Date: 02/11/2010 01:16 PM

Subject: New message: "Appendix C:

Noise Immunity NMdiff"




Mike DeVita,


A new message was posted in the Discussion thread "Appendix C: Noise

Immunity NMdiff":


https://supportforums.cisco.com/message/3017541#3017541


Author : giuslar

Profile : https://supportforums.cisco.com/people/giuslar


Message:

Actions

This Discussion