Traffic shaping issue with MLPPP

Unanswered Question
Feb 10th, 2010
User Badges:

Hi all,


I am trying to enable traffic shaping over a Multilink consisting of 3 T1 serial interfaces. I have to configure shaping 90% of total bandwidth (4.5 Mbps). However, it gives me error message that shaping is restricted to individual serial link bandwidth.


Router(config-if)#service-policy output SHAPE-4.5M

%4050000 bps is greater than interface Serial1/1.1/1:0 rate (1536000 bps),

class 'class-default'

%4050000 bps is greater than interface Serial1/1.1/2:0 rate (1536000 bps),

class 'class-default'

%4050000 bps is greater than interface Serial1/1.1/3:0 rate (1536000 bps),

class 'class-default'



Is there an option to configure it? This is an OSM module on Cisco 7600 router.


Thanks,

Faad

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion