I am trying to setup a 2600 series router so that is has multiple vlans, (office network, wifi, voip). That part i can do easly however, i would like the 2600 to be the dhcp server for each of these networks as well. I can see i need to set each vlan interface up to be a dhcp-relay and then i can assign the routers main address as the dhcp server. What i am unsure of is a) how to tell the dhcp server that pool VOIP should only be assigned to VLAN VOIP and the pool WIFI should only go to VLAN WIFI. I see something in the config about using dhcp class and matching on that but am not sure how to work that out.
I then also need to be able to assign some static ip's to each of the vlans as well via dhcp for regular users.
Any help of config snipets would be great.
If it helps my ranges will be:
10.208.2.0/32 VOIP - router .1
10.208.3.0/32 WIFI - router .1
10.208.1.0/32 LAN - router .1
Router's external ip routing to firewall 10.208.1.253/30
DNS Server 126.96.36.199