02-11-2010 01:52 AM - edited 03-15-2019 09:22 PM
Hi,
i know that is better specify an IP address for all member of CUCM cluster. The procedure deals with going to CUCM servers, change the name to IP and, finally, change the URL's in "enterprise parameters" to allow phones use IP too. My question is which configuration steps are better between this 2:
A. Configure all cluster members by name and, after the last subscriber is added, change the names to IP of all members (and change "enterprise parameters" URL's)
B. Install the Publisher, change his name to IP, add the following Subscribers using IP directly.
Thank you.
02-11-2010 02:18 AM
Hi,
Iam usually changing them after finishing installation and while configuration with no issues found till now
Thanks
02-11-2010 02:27 AM
Hi,
when you say "after finishing installation " you mean after the last subscriber is added and the whole cluster is working fine ?
02-11-2010 02:36 AM
Hi,
Yes,
You can check this good link which show what should be confirmed before and after changing cucm ip address from another ip address or hostname
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/ipchange/ipchg712.html
wish this be helpful
Thanks
02-11-2010 02:48 AM
Great link, Thank you
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: