CME to CUCM as a H323 GW

Answered Question
Feb 11th, 2010

Hi All,

I have a small remote site that has a 2851 runnning CME 7 and wish to get the phones to register to a CUCM (v7.1)in London. Currently the PSTN connections are 5 x FXO ports that have PLAR OPX configured to reception x100. The CME will be registered as an H323 gateway as we are using analogue ports.

My question is how do I configure the FXO ports and dial peers to ring the reception dn once it is configured on CUCM? Can I use PLAR OPX and create a dial-peer with that pattern pointing to CUCM, or should I use translation patterns to amend the called number on the ports?

Any help and or example configs for the H323 GW would be appreciated.

Thanks,

Phil

I have this problem too.
0 votes
Correct Answer by Paolo Bevilacqua about 6 years 10 months ago

Just plar to a number the CUCM can handle, and of course have DP covering it.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Paolo Bevilacqua Thu, 02/11/2010 - 06:15

Just plar to a number the CUCM can handle, and of course have DP covering it.

stowellp Thu, 02/11/2010 - 06:59

Just tested using PLAR and it worked that's great thanks, it's

much appreciated!

Cheers,

Phil

Actions

This Discussion

Related Content