Hi all - I just can't get my head around this really simple interVlan routing issue. I have two VLANs (1 & 6) on a 3560 L3 switch. I simply need to route between them. Here is how I have it set up:
Firewall is the VLAN1 client's default gateway:
(hosts on 10.10.22.x/255.255.255.0; gateway 10.10.22.1)
ip address 10.10.22.254 255.255.255.0
VLAN6: (hosts on 192.168.25.x/255.255.255.0; gateway 192.168.25.1)
ip address 192.168.25.1 255.255.255.0
int gi0/31 (an available unused port)
ip address ?.?.?.?
Is the issue that all my 10.10.22.x clients are going to 10.10.22.1 trying to find 192.168.25.x, when they would need to go to 10.10.22.254; then the switch should have an ip route of 0.0.0.0 0.0.0.0 10.10.22.1? Then give the router on gi0/31 the 10.10.22.254 address?
(as a side note, it would be easier for me to change the gateway's IP than to change each VLAN1 client's IP.)
Thanks for any help!