Aironet 1130 web gui users

Answered Question
Feb 11th, 2010

Hi there

I would like to have two different users for the aironet 1130 cli and web access. At the moment there is userA with a given password. When I want to logon to the web gui I have to use userA with the enable secret password.

Now I want to create a userB with a password and privilege level 15. userA and userB should logon to the web gui with THEIR passwords and not the global enable secret password. If I configure ip http authentication aaa, the login popup shows always level_1 or view_access, where I can logon with both users. When I want to reconfigure something, it shows the login popup with level_15.

How can I configure, that it initialy shows the level_15 instead of level_1?

Thanks a lot in advance


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (1 ratings)
irishboyabroad Thu, 02/11/2010 - 12:26


I think I have exactly the same issue as you. Ive also configured ip http authentication aaa and I now only get "level_1 or view_access" when browsing to the AP. I want to get access to the full configuration web menu but I can't figure out how to do so.

You mention "When I want to reconfigure something, it shows the login popup with level_15." How do you do this ?

Can you post your solution if you manage to figure it out ? I'll do likewise...


irishboyabroad Fri, 02/12/2010 - 08:57

Thanks Dominic but I dont think the link is applicable as its mentioning CLI based accessS

I'm using TACACS ( actually tac_plus ) and when I log in to the CLI I connect
with priviledge 15 as configured in TACACS

cisco-1130ag#sh user
    Line       User       Host(s)              Idle       Location
*  1 vty 0     admin      idle                 00:00:00

  Interface    User               Mode         Idle     Peer Address

cisco-1130ag#sh priv
Current privilege level is 15


group = admins {
        default service = permit
        service = exec {
        priv-lvl = 15
user = admin {
member = admins
        login = des xxxxxxxx

But with the same user via the http interface Im assigned to priviledge level 1.

cisco-1130ag#deb ip http auth
HTTP Server Authentication debugging is on
Feb 12 16:19:51.670: HTTP AAA picking up console Login-Authentication List name: default
Feb 12 16:19:51.671: HTTP AAA picking up console Exec-Authorization List name: default
Feb 12 16:19:51.700: HTTP: Priv level authorization success priv_level: 1

My question still stands. How do I get access to the full aironet web configuration interface when using TACACS ???

Thanks in advance to anyone who can answer my query.........



This Discussion