02-11-2010 01:04 PM - edited 03-19-2019 12:27 AM
Can anyone explain how is it possible ? Any ideas, guys?
CUCM 7.1.3
PC1 with IP comm. and user1 is logged in to Extension Mobility + Click to Call. User1 can make a call using Click to Call.
PC2 with IP comm. and user2 is logged in to Extension Mobility + Click to Call. User2 can't make a call using Click to Call.
The following error appears on the PC2 screen:
"The call failed. Please ensure you are logged into your Extension Mobility device. If the problem persists contact your phone administrator"
Here is the log from PC2:
2010-02-03 12:49:46,781 [16] INFO - 1 devices returned from ParseDevices
2010-02-03 12:49:46,781 [16] DEBUG - 0) MY IPC - Cisco IP Communicator - SEP0022680B43E9
2010-02-03 12:49:48,703 [1] DEBUG - entering FindCallRecord - 26468949
2010-02-03 12:49:48,703 [1] INFO - matched tag with call record - 26468949
2010-02-03 12:49:48,703 [1] INFO - action - new call: ct:Click to Call;rt:20100203-12494870;pn:26468949;pt:;cn:desk phone ct:;desk phone rt:;desk phone pn:;desk phone pt:;soft Phone cn:soft Phone ct:;soft Phone rt:;soft Phone pn:;soft Phone pt:;soft Phone cn:
2010-02-03 12:49:48,734 [1] DEBUG - ClickToCallDialer server and port10.100.3.1:8443
2010-02-03 12:49:48,734 [1] INFO - make call through WD - 26468949
2010-02-03 12:49:48,734 [1] INFO - MakeCall: user(a.koltalo) to(26468949) with profile(a.koltalo;Extension Mobility Phone;;True)
2010-02-03 12:49:51,859 [1] ERROR - make call failure through WD - CALL_FAILURE_ERROR
2010-02-03 12:49:51,859 [1] DEBUG - entering WriteRecord - 26468949
2010-02-03 12:49:51,859 [1] INFO - record already exists, go through records to remove matched record - C:\Documents and Settings\Jevgenij\Application Data\Cisco\Click to Call\Data\Outbound\26468949.xml
2010-02-03 12:49:51,859 [1] DEBUG - entering ReadRecord - C:\Documents and Settings\Jevgenij\Application Data\Cisco\Click to Call\Data\Outbound\26468949.xml
2010-02-03 12:49:51,875 [1] DEBUG - push call record into stack
2010-02-03 12:49:51,875 [1] DEBUG - write record into file
2010-02-03 12:49:51,875 [1] INFO - outbound call record changed, fire event to notify
2010-02-03 12:52:08,484 [17] DEBUG - ClickToCallDialer server and port10.100.3.1:8443
2010-02-03 12:52:08,593 [17] DEBUG - entering QueryDevices - 10.100.3.1 - a.koltalo
2010-02-03 12:52:08,656 [17] INFO - return success from GetDevices -
User2 moves from PC2 to PC1 - run IP comm. do loggin to Extension Mobility and run Click to Call with his credentials. User2 can make a call using Click to Call
User1 moves from PC1 to PC2 - run IP comm. do loggin to Extension Mobility and run Click to Call with his credentials. User1 can't make a call using Click to Call
PC2 and PC1 - have the same configuration and software installed, both PCs are on the same LAN subnet. There are no any firewalls between PCs and CUCM server.
02-11-2010 05:43 PM
Sounds like a possible permissions issue on the workstation to me. Have you tried configuring one of your test users as the local admin on the workstation?
Please remember to rate helpful responses and identify
02-13-2010 11:50 AM
Thank you for reply.
Everything has started to work after the WD service restart.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: