TCL or EEM scripts to do TDR testing via SNMP?

Answered Question
Feb 11th, 2010
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Does anyone know of any EEM or TCL scripts to do TDR testing via SNMP?  Is it even possible?

Correct Answer by Joe Clarke about 7 years 2 months ago

I do not, and I didn't see anything obvious on Cisco Beyond.  There is a CISCO-CABLE-DIAG-MIB which could be used to start tests, and get their results.  This MIB is supported on a few different device types, and could be used in conjunction with EEM to start and monitor TDR tests.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Joe Clarke Fri, 02/12/2010 - 12:52
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

I do not, and I didn't see anything obvious on Cisco Beyond.  There is a CISCO-CABLE-DIAG-MIB which could be used to start tests, and get their results.  This MIB is supported on a few different device types, and could be used in conjunction with EEM to start and monitor TDR tests.

Leo Laohoo Fri, 02/12/2010 - 13:54
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Hi Joe,


Thanks for responding.  +5

Actions

This Discussion