Blast-Group final to Auto Attendant fails

Unanswered Question
Feb 12th, 2010

Hi.

I have a Blast-group configured with the following parameters:

voive hunt-group 1 parallel

pilot 18

list 11, 12, 13, 14

timeout 15

final 19 <-- Pilot Auto Attendant

I have tested every possible configuration with blast group but my final fails with a busy signal.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Marcos Hernandez Fri, 02/12/2010 - 05:49

Try configuring an ephone-dn that has call forward all pointing to the AA< and make your hunt group final number that of such dn.

Marcos

SKasper1975 Fri, 02/12/2010 - 07:48


marchern schrieb:

Try configuring an ephone-dn that has call forward all pointing to the AA< and make your hunt group final number that of such dn.

Marcos



voive hunt-group 1 parallel

pilot 18

list 11, 12, 13, 14

timeout 15

final 17

ephone-dn 30

pilot 17

call-forward all 19 <--- Auto Attendant

Problem still exists.

Marcos Hernandez Fri, 02/12/2010 - 07:50

OK, remove this and make sure that the call forward timer for all members of the hunt group is HIGHER than the blast group timeout.


Marcos

Steven DiStefano Fri, 02/12/2010 - 06:53

Make sure the individual members of the Blast group have theur CFNA timers set HIGHER than the blast group...

SKasper1975 Fri, 02/12/2010 - 07:50

sdistef schrieb:

Make sure the individual members of the Blast group have theur CFNA timers set HIGHER than the blast group...

I will test it monday

To be continued ....

Actions

This Discussion