cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1047
Views
0
Helpful
5
Replies

Blast-Group final to Auto Attendant fails

SKasper1975
Level 1
Level 1

Hi.

I have a Blast-group configured with the following parameters:

voive hunt-group 1 parallel

pilot 18

list 11, 12, 13, 14

timeout 15

final 19 <-- Pilot Auto Attendant

I have tested every possible configuration with blast group but my final fails with a busy signal.

5 Replies 5

Try configuring an ephone-dn that has call forward all pointing to the AA< and make your hunt group final number that of such dn.

Marcos


marchern schrieb:

Try configuring an ephone-dn that has call forward all pointing to the AA< and make your hunt group final number that of such dn.

Marcos



voive hunt-group 1 parallel

pilot 18

list 11, 12, 13, 14

timeout 15

final 17

ephone-dn 30

pilot 17

call-forward all 19 <--- Auto Attendant

Problem still exists.

OK, remove this and make sure that the call forward timer for all members of the hunt group is HIGHER than the blast group timeout.


Marcos

Steven DiStefano
VIP Alumni
VIP Alumni

Make sure the individual members of the Blast group have theur CFNA timers set HIGHER than the blast group...

sdistef schrieb:

Make sure the individual members of the Blast group have theur CFNA timers set HIGHER than the blast group...

I will test it monday

To be continued ....

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: