Problem with VPN on SA520

Unanswered Question
Feb 12th, 2010

Hi, I would like your help why I have problem with vpn configuration with Shrewsoft to SA 520.

On Cisco appliance I have configured an VPN with ipsec user and PSK but when I try to connect I have in log:

2010-02-12 09:04:55: INFO:  Adding IPSec configuration with identifier "damorvpn" 2010-02-12 09:04:55: INFO:  Adding IKE configuration with identifer "myvpn" 2010-02-12 10:14:05: ERROR:  Could not find configuration for 217.x.y.z[500]

I have used the default parameter on Cisco and in vpn client I have used:

Authentication Method --> Mutual PSK+XAuth

Identification Type: FQDN --> local.com

Remote Identity: Any

..and all parameters are default.

On Shrewsoft I have:

config loaded for site 'myvpn'

configuring client settings ...

attached to key daemon ...

peer configured

iskamp proposal configured

esp proposal configured

client configured

local id configured

pre-shared key configured

bringing up tunnel ...

negotiation timout occurred

tunnel disabled

detached from key daemon ...

I very much hope in a your help, thanks.

-

Salvatore.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
pixteam2007 Tue, 03/30/2010 - 07:25

sorry but I haven't found a solution for this problem, if possible do you use 5505 model.

-

Salvatore.

Actions

This Discussion