NetConfig job failing with RME_CDL1031

Unanswered Question
Feb 15th, 2010
User Badges:

Hi,


I have a NetShow job that is failing with this message:

ERROR:RME_CDL1031:Transport  session to device failed Couldnot enter ENABLE mode from USER mode on Device. Couldnot enter ENABLE mode from USER mode on Device.


I have double checked  the credentials in DCR (manually and using the 'check device credentials' option) and its configured properly.


Could you please advice what is wrong?


Thanks,

Amit

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Mon, 02/15/2010 - 17:47
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

If you are using telnet, the easiest thing to do is get a packet capture of all tcp/23 traffic between the RME server and the device when running the Netshow job.  This will show why RME was unable to enter enable mode.

Actions

This Discussion