GLC-LH-SM transceiver modules

Unanswered Question
Feb 15th, 2010
User Badges:

I have an application where two C2960-24TC-L switches located 450m apart have to be connected via a 62.5 MM fibre link using the GLC-LH-SM transceiver modules. The fibre link is terminated to SC patch panels at both ends. The question is can off the shelf 62.5 MM LC-SC patch cords be used to connect the switches to the patch panels? If not please recommend a suitable patch cord, thank you.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Leo Laohoo Mon, 02/15/2010 - 16:39
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Should be fine.

Tom Randstrom Mon, 02/15/2010 - 17:09
User Badges:
  • Gold, 750 points or more

It is recommended that you use  Mode Conditioning Patch Cabes for your application; model CAB-GELX-625= (or similar from another vendor).

The following documents outlines the implementation of these cables.

I hope this helps!


This Discussion

Related Content