cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3770
Views
0
Helpful
3
Replies

GLC-LH-SM transceiver modules

I have an application where two C2960-24TC-L switches located 450m apart have to be connected via a 62.5 MM fibre link using the GLC-LH-SM transceiver modules. The fibre link is terminated to SC patch panels at both ends. The question is can off the shelf 62.5 MM LC-SC patch cords be used to connect the switches to the patch panels? If not please recommend a suitable patch cord, thank you.

3 Replies 3

Leo Laohoo
Hall of Fame
Hall of Fame

Should be fine.

Tom Randstrom
VIP Alumni
VIP Alumni

It is recommended that you use  Mode Conditioning Patch Cabes for your application; model CAB-GELX-625= (or similar from another vendor).

The following documents outlines the implementation of these cables.

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/installation/note/OL_19329.html

I hope this helps!

Thanks for the advice

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: