Wireless End Host Report LMS 3.2

Answered Question
Feb 15th, 2010
User Badges:

We are having LMS 3.2 with Campus Manager 5.2 , I have added our WisM (Wireless Integrated ServiceModule) in the LMS and it shows that the device is reachable , we get inventory , run jobs etc . However when I try to get the End Host Report for this device it shows that no hosts found


I have configured SNMP v2 read only settings on the controller and the LMS


I wanted to know will we get End User Reports from the WiSM / Cisco 4402 controllers. Is there some more config etc need to be done



Regards

Correct Answer by Joe Clarke about 7 years 2 months ago

The Wireless End Hosts report only works with WLSEs.  It does not support WLC devices.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Joe Clarke Mon, 02/15/2010 - 22:54
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

The Wireless End Hosts report only works with WLSEs.  It does not support WLC devices.

Joe Clarke Mon, 02/15/2010 - 23:54
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Yes, at some point, LMS and WLC integration (or WCS integration) is planned.

Actions

This Discussion