cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
617
Views
0
Helpful
3
Replies

Wireless End Host Report LMS 3.2

We are having LMS 3.2 with Campus Manager 5.2 , I have added our WisM (Wireless Integrated ServiceModule) in the LMS and it shows that the device is reachable , we get inventory , run jobs etc . However when I try to get the End Host Report for this device it shows that no hosts found

I have configured SNMP v2 read only settings on the controller and the LMS

I wanted to know will we get End User Reports from the WiSM / Cisco 4402 controllers. Is there some more config etc need to be done

Regards

1 Accepted Solution

Accepted Solutions

Joe Clarke
Cisco Employee
Cisco Employee

The Wireless End Hosts report only works with WLSEs.  It does not support WLC devices.

View solution in original post

3 Replies 3

Joe Clarke
Cisco Employee
Cisco Employee

The Wireless End Hosts report only works with WLSEs.  It does not support WLC devices.

Thanks Joe

Will the WLC be supported in any future releases

Regards

Yes, at some point, LMS and WLC integration (or WCS integration) is planned.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: