02-15-2010 10:47 PM
We are having LMS 3.2 with Campus Manager 5.2 , I have added our WisM (Wireless Integrated ServiceModule) in the LMS and it shows that the device is reachable , we get inventory , run jobs etc . However when I try to get the End Host Report for this device it shows that no hosts found
I have configured SNMP v2 read only settings on the controller and the LMS
I wanted to know will we get End User Reports from the WiSM / Cisco 4402 controllers. Is there some more config etc need to be done
Regards
Solved! Go to Solution.
02-15-2010 10:54 PM
The Wireless End Hosts report only works with WLSEs. It does not support WLC devices.
02-15-2010 10:54 PM
The Wireless End Hosts report only works with WLSEs. It does not support WLC devices.
02-15-2010 11:50 PM
Thanks Joe
Will the WLC be supported in any future releases
Regards
02-15-2010 11:54 PM
Yes, at some point, LMS and WLC integration (or WCS integration) is planned.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide