reg:3560 switch

Unanswered Question
Feb 16th, 2010

Dear sir,


I have cisco 3560 switch and i have 6MB banwidth(rj-45) now i want segrigate the B.W to 2MB for one port and 2MB for second port and 2MB for third port.


is it possible can any body help in this



Thanks&Regards

srini

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Kevin Dorrell Tue, 02/16/2010 - 07:41

I'm not sure I understand what you mean when you say "I have 6 Mb bandwidth".  I presume what you are getting at is that you have a 6 Mbps Internet connection via a router, and you want it to be shared fairly between three client PCs on your switch.


If it's the scenario I think it is, then you are receiving traffic from your Internet line at up to 6 Mbps.  Unfortunately, you have no control over the way the ISP sends you the traffic, so it is not possible to partition the line in the way you are suggesting.


I hope this helps.  If I have misunderstood the question, please could you expalin exactly what you want to achieve.


Kevin Dorrell

Luxembourg

Actions

This Discussion