Cisco 1131 LWAPP AP Showing Unreachable

Unanswered Question
Feb 16th, 2010
User Badges:

In our LMS 3.2 we have added the WLC 4402 , WiSM controllers , we have 1131 LWAPP registered to these controllers which are showing as Unreachable in the LMS Device Discovery failed through CDP .


When we login into the controller on the AP , CDP is enabled . however the controller does not support CDP


I wanted to know how can these AP  either be made reachable or excluded from discovery


Regards

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Tue, 02/16/2010 - 12:19
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

LWAPPs are not SNMP-manageable, and thus will show as unreachable in LMS.  In order to exclude them, you must block out their IP addresses in the Discovery address filters (i.e. set the filter type to exclude, and list out the addresses or address ranges which cover the LWAPPS).

Actions

This Discussion