simple tcl script in cucme

Unanswered Question
Feb 17th, 2010
User Badges:

Hi,

I need a simple TCL script, that picks up the phone, plays a greeting message and then does DID further in without caller intervention. Currently I have 2811 with a BRI, the local telco sends only the last two digits that are a direct match to the extensions of the IP phones and I do DID.

I analyzed b-acd-aa script, that is shipped with the CME, but in fact I do not need such a complex state machine with digit collection, hunt groups, etc.

(http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/cme40tcl.html)

I believe I need something like:

...

application

   service foo flash:foo.tcl

     param welcome-prompt foo.au

....

dial-peer voice 10 pots

service foo

port 0/2/0

incoming called [0-1].

direct-inward-dial

..............

Please advise wether to build a new TCL script, or to try to provide all the necessary parameters to the existing scripts and try to make them work for what I need (e.g. drop-through, etc.)

Any comments are welcome!

Zzzz.




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Fri, 02/19/2010 - 08:40
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You can use b-acd/aa in drop-through mode.


if you are interested in acquirinf a num2name script that does it and much more, you can contact me at the address present in my profile.

Actions

This Discussion

Related Content