SPA1001 and daylight saving settings

Unanswered Question
Feb 17th, 2010
User Badges:

I have four ATA SPA devices, SPA3000, SPA2100, SPA2102 and SPA1001.

All have had a problem with daylight saving time in Australia. The settings seem to be ignored as they're backwards compared to the nothern hemisphere.

I've managed to find firmware updates for the SPA2100 and SPA2102  which have fixed these. I can't find firmware for the SPA3000 or SPA1001.

Current firmware versions I have: SPA2100 - 3.3.14, SPA2102 - 5.2.10, SPA3000 - 3.1.20(GW) and SPA1001 - 3.1.19(SE)

Any help in finding firmware updates for the SPA1001 and SPA3000 devices would be greatly appreciated.

My main reason for wanting this fixed is the callerid time presented to the phone is an hour out during the summer. I live in Adelaide South Australia and we have a 9:30 timezone offset. I can't manually set the timezone to another zone because there is no 10:30 timezone in the list. I've neen putting up with this for several years now but after frinding firmware for the 2100 and 2102, I'm hopeful of fixing the other two devices.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion