dial-peers and outgoing calls

Unanswered Question
Feb 18th, 2010
User Badges:

Hi,


I created 2 dial peers:


UC520(config)#dial-peer voice 104 pots
UC520(config-dial-peer)#destination-pattern 9.T
UC520(config-dial-peer)#port 0/1/0


UC520(config)#dial-peer voice 105 pots
UC520(config-dial-peer)#destination-pattern 9.T
UC520(config-dial-peer)#port 0/1/1


what I want to do is,


1. IF a number starts with 1 or 9, It must directly go to the FXO port, which my analog central connected. For example if I dial 112, it will forword it to one of my fxo port. In my setup, if I dial 9112, I can call my analog central's local number.


2. On outgoing calls, x user must go on port 0/1/0 and y user must go on port 0/1/1. How can I do that?


I don' see connection cli under the dial-peer voice 104 pots. IOS version : uc500-advipservicesk9-mz.150-1.XA

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Steven Smith Thu, 02/18/2010 - 07:51
User Badges:
  • Gold, 750 points or more

For question 1, you can create another dial-peer that works for digits starting with 1.


UC520(config)#dial-peer voice 107 pots
UC520(config-dial-peer)#destination-pattern 1.T
UC520(config-dial-peer)#port 0/1/0



For question 2, this can be done with corlist.


http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

Actions

This Discussion