video conferencing with cuva 7942

Answered Question
Feb 18th, 2010

Is there something on the 7942 that needs to be configured to have video conferencing? I'm not getting the conference. The camera is working but the video doesn't start when a call is placed.

I have this problem too.
0 votes
Correct Answer by Steven Smith about 6 years 9 months ago

The config is the same.  A few things though...

You need to make sure that the version of IP Communicator works with that version of CUVA.  I believe you also need to make sure CUVA is setup to work with IP Communicator.

On the phones, you should see a little video camera icon in the lower right corner of the display.  Right above the softkeys.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Steven Smith Thu, 02/18/2010 - 11:05

Are you calling another local phone with a CUVA?  What phone is that?

You need the following to make this work...

config t

ephone 1 (or the ephone that you are using)

video

telephony-service

video

service phone videoCapability 1

no create cnf

create cnf

ephone 1

restart

Do that for both phones you are using.

SHeidemann Thu, 02/18/2010 - 14:08

The other phone is CIPC. Is the config the same for it's ephone?

Correct Answer
Steven Smith Thu, 02/18/2010 - 14:11

The config is the same.  A few things though...

You need to make sure that the version of IP Communicator works with that version of CUVA.  I believe you also need to make sure CUVA is setup to work with IP Communicator.

On the phones, you should see a little video camera icon in the lower right corner of the display.  Right above the softkeys.

SHeidemann Thu, 02/18/2010 - 14:37

Steven,

Thank you. Turned out I needed to turn the camera on once the conversation was going under settings of the video screan. I have checked under the video >camera on, for some reason it didn't stay on once a call was initiated. I had this working fine at one point.... things changed? I don't recall needing any CLI before. No matter, as long as it's working.

Thanks once again.

Stephanie

Lulzim Islami Wed, 02/09/2011 - 00:38
/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Hi everyone,

I have CUCM 7.1.5 and we are trying to make video conferencing with CUVA and 7942g phones. CUVA works fine with 2 users, but when I'm trying to make ad hoc conference or meet me conference the video disappears. On CUCM I have configured Conference Bridge recourses, transcoding and media resources group with list, same thing on a router too. Can somebody please instruct me what do I'm missing here?

Thanks

Actions

This Discussion