WPA on 1242

Unanswered Question
Feb 18th, 2010
User Badges:

I am trying to upgrade the encryption on some 1242 access points.  I want to use WPA2.  When I go to set WPA it is requiring an authenication server address.  I don't want to use authenication.  Is there a way to implement WPA without authenication?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Milton Tizoc Mon, 03/01/2010 - 10:24
User Badges:

Hi Mark, i think you are using autonomous access point, if you try to configured WPA by web is a little complicated (for me), if you do it by CLI is faster here is a example to configure it:


dot11 ssid SSID-NAME
   authentication open
   authentication key-management wpa
   wpa-psk ascii PASSWORD


int d0

ssid SSID-NAME


int d1

ssid SSID-NAME


i hope this help.

Best Regards,

Milton Tizoc.

Milton Tizoc Mon, 03/01/2010 - 10:26
User Badges:

Sorry i forgot to put the encyption in the radios


int d0

ssid SSID-NAME

encryption vlan 15 mode ciphers aes-ccm


int d1

ssid SSID-NAME

encryption vlan 15 mode ciphers aes-ccm


Regards,

Milton Tizoc.

Actions

This Discussion

Related Content