Hello again guys,
I have an analog conference phone using an FXS port on a H.323 gateway, the analog phone is not capable of 3 way calling right now.
Before changing the gateway to MGCP I wanted to ask if its possible to have 3 way calling using an FXS line on an H.323 gateway. The number being used is currently set up as a route pattern in CUCM 7.1.
For stcapp, you need a minimum of 12.4(15)T
You will need to configure the dial-peer to be controlled by SCCP using stcapp. This allows the port to utilise the DSP chips on the gateway so that you can have 3-way conferencing.
stcapp ccm-group 1
dial-peer voice 22 pots
description **Dial Peer for Main Conference Phone**