Solved: Can 2 seperate VPN tunnels on same ASA communicate with each other

logan-7 · ‎02-19-2010

Here is the scenario I have a VPN tunnel with one of my remote locations. I also have a VPN Tunnel with a Vendor that supports equipment for my organization. I need to have my Vendor able to communicate with equipment that live down my other VPN tunnel. Both Tunnels are on the Same ASA5540.

1. Is this Possible?

2 How to configure it?

thanks

JORGE RODRIGUEZ · ‎02-19-2010

Follow this example link . Enhanced spoke-to-spoke VPN, allows for both tunnel terminating at your asa5540 to communicate , using permit intra-interface parameter along with configuring accless-list to permiting interesting traffic in each tunnel end point.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtml

Jorge Rodriguez

View solution in original post

JORGE RODRIGUEZ · ‎02-19-2010

Follow this example link . Enhanced spoke-to-spoke VPN, allows for both tunnel terminating at your asa5540 to communicate , using permit intra-interface parameter along with configuring accless-list to permiting interesting traffic in each tunnel end point.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtml

Jorge Rodriguez