02-19-2010 11:53 AM - edited 03-15-2019 09:29 PM
Hello,
We currently have a catalyst 6000 with an fxs blade model ws-x6624-fxs
we are migrating the 6000 to a newer catalyst 65006E.
Can i migrate the fxs blade from the 6000 to the 6506E ?
i need you advice
thanks
Solved! Go to Solution.
02-24-2010 05:02 AM
Hello,
You can use WS-X6624-FXS on 6500 switches in CatOS mode only, there is no support for this module in IOS.
Another thing is that WS-X6624-FXS module is EOS/EOL long time ago:
Also support for this card will end up on May 16 2010 - less then 3 months from now.
You can check next generation voice module for 6500/7600 Cisco offers:
Thanks,
Vladimir.
02-24-2010 05:02 AM
Hello,
You can use WS-X6624-FXS on 6500 switches in CatOS mode only, there is no support for this module in IOS.
Another thing is that WS-X6624-FXS module is EOS/EOL long time ago:
Also support for this card will end up on May 16 2010 - less then 3 months from now.
You can check next generation voice module for 6500/7600 Cisco offers:
Thanks,
Vladimir.
02-24-2010 07:25 AM
thanks for the information
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide