I have been searching cisco.com and some other forums in regards to this but can't find an answer.. Hopefully someone can help me out here.
I got a Cisco 7940 with SIP firmware, SIP V. 8 and I would like to convert it to SCCP.
I have downloaded the latest SCCP version 8.11 from Cisco.com and then copied the files to TFTP server.
Please note that I'm not using any Call Manager application. Based on Cisco documents, I used this one:
If I upload the firmware files, OS79XX.TXT and SIPDefault.cnf to TFTP, the phone should convert automatically to SCCP. But it won’t.
I have uploaded the following files:
In SIPDefault.cnf I have changed image_version: to image_version: "P00308010200"
OS79XX.TXT: One line and that's: P00308010200
The TFTP logs show that the phone is requesting SIPDefault.cnf and downloads it but the phone still won’t convert to SCCP firmware. I dont see it requesting OS79XX.TXT though.
I have also telnet to the phone and use the erase command to re-do the setting... but no luck
Thanks for your help