VSS boot error

Answered Question
Feb 21st, 2010
User Badges:

Dear friends,


I get the following error on the VSS standby chassis at bootup.


Error: router peer template mode is NULL

Error: router session template mode is NULL

However, i am able to get connectivity to the switch and everything is working fine.

But i wanted to know really what these error messages mean and if there is a way to avoid them.

I am running 6500 with VS-720 sup and IOS is 12.2(33)SXI3.

Please advise.

Thanks a lot

Gautam

Correct Answer by Reza Sharifi about 7 years 5 months ago

gautamzone wrote:


Dear friends,


I get the following error on the VSS standby chassis at bootup.


Error: router peer template mode is NULL

Error: router session template mode is NULL


However, i am able to get connectivity to the switch and everything is working fine.


But i wanted to know really what these error messages mean and if there is a way to avoid them.


I am running 6500 with VS-720 sup and IOS is 12.2(33)SXI3.


Please advise.


Thanks a lot

Gautam



Hi Gautam,


These are cosmetic errors during VSS boot up process.  They do not harm any thing and as you already know will not effect the functionality of the router.  These errors have been there since the release of SXI1 and I have seen them since.  I have spoken to Cisco IOS BU and there is no immediate plan on fixing these error soon since they are cosmetic.


HTH

Reza

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Reza Sharifi Sun, 02/21/2010 - 14:43
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

gautamzone wrote:


Dear friends,


I get the following error on the VSS standby chassis at bootup.


Error: router peer template mode is NULL

Error: router session template mode is NULL


However, i am able to get connectivity to the switch and everything is working fine.


But i wanted to know really what these error messages mean and if there is a way to avoid them.


I am running 6500 with VS-720 sup and IOS is 12.2(33)SXI3.


Please advise.


Thanks a lot

Gautam



Hi Gautam,


These are cosmetic errors during VSS boot up process.  They do not harm any thing and as you already know will not effect the functionality of the router.  These errors have been there since the release of SXI1 and I have seen them since.  I have spoken to Cisco IOS BU and there is no immediate plan on fixing these error soon since they are cosmetic.


HTH

Reza

Actions

This Discussion