Catalyst - 6500

Unanswered Question

Hi

I have output from the switch, by looking at the output how can we figure out if the switch chassis is 6509 or 6509-E

Chassis Type: 6509
show module
Mod Slot Ports Module-Type               Model               Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1   1    2     1000BaseX Supervisor      WS-X6K-SUP1A-2GE    yes ok
15  1    1     Multilayer Switch Feature WS-F6K-MSFC         no  ok
2   2    2     1000BaseX Supervisor      WS-X6K-SUP1A-2GE    yes standby
16  2    1     Multilayer Switch Feature WS-F6K-MSFC         no  ok
3   3    48    10/100BaseTX Ethernet     WS-X6248-RJ-45      no  ok
4   4    48    10/100BaseTX Ethernet     WS-X6248-RJ-45      no  ok
5   5    48    10/100BaseTX Ethernet     WS-X6248-RJ-45      no  ok
6   6    0     10/100BaseTX Ethernet     WS-X6248-RJ-45      no  power-down

Mod Module-Name          Serial-Num
--- -------------------- -----------
1                        SAD040304MN
15                       SAD04010LXK
2                        SAD0349032B
16                       SAD0349037C
3                        SAD03285034
4                        SAD034903ZJ
5                        SAD03261670
6                                 

Mod MAC-Address(es)                        Hw     Fw         Sw
--- -------------------------------------- ------ ---------- -----------------
1   00-30-b6-34-bd-0a to 00-30-b6-34-bd-0b 3.1    5.3(1)     6.4(20)
    00-30-b6-34-bd-08 to 00-30-b6-34-bd-09
    00-d0-00-b5-b0-00 to 00-d0-00-b5-b3-ff
15  00-30-b6-34-bd-0c to 00-30-b6-34-bd-4b 1.3    12.1(12c)E 12.1(12c)E1
2   00-30-b6-d6-c2-0e to 00-30-b6-d6-c2-0f 1.0    5.2(1)     6.4(20)
    00-30-b6-d6-c2-0c to 00-30-b6-d6-c2-0d
16  00-30-b6-d6-c2-10 to 00-30-b6-d6-c2-4f 1.2    12.0(3)XE2 12.0(3)XE2
3   00-d0-d3-31-54-5c to 00-d0-d3-31-54-8b 1.1    4.2(0.24)V 6.4(20)
4   00-30-b6-d6-bc-04 to 00-30-b6-d6-bc-33 1.1    4.2(0.24)V 6.4(20)
5   00-d0-ba-45-91-d0 to 00-d0-ba-45-91-ff 1.1    4.2(0.24)V 6.4(20)
6   unknown

Mod Sub-Type                Sub-Model           Sub-Serial  Sub-Hw
--- ----------------------- ------------------- ----------- ------
1   L3 Switching Engine     WS-F6K-PFC          SAD0402024Z 1.0
2   L3 Switching Engine     WS-F6K-PFC          SAD034902KM 1.0

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
csc010627097 Mon, 02/22/2010 - 06:08

Hi,  with the output of show version command you will be able to verify it.

show version

.....

cisco WS-C6506-E (R7000) processor

....

Regards

Actions

This Discussion

Related Content