ā02-23-2010 04:37 AM - edited ā03-11-2019 10:13 AM
Hi:
We have a problem with H.323 sessions.. We have upgraded two Cisco ASA 5520 with 8.2(1) version. After this we have problem with H.323 sessions. The sessions are establish through Call Manager and communications works fine some minutes. Then the sessions are lost they donĀ“t hold keep-alive.
Regards
ā02-23-2010 02:32 PM
You can check the ASA h323 logs and debugs when the session is torn down to try to identify the cause they are torn down.
Open a case with TAC for deeper investigation.
PK
ā03-01-2010 03:52 AM
Thanks PK,
Do you know if there exists a specific debug for H323, or the which is the most useful debug we should setup?
Thank you!
ā03-01-2010 06:07 AM
I would suggested "logging level debug" and "debug h323 h225 event" and "debug h323 h245 events"
I hope it sheds some light.
PK
ā03-02-2010 02:07 AM
Hi PK,
We haven't configured yet the h323 debug, but we did another test capturing simple logs from ASDM and we've setup a sniffer capture, and there we see TCP Keep Alive packets between Call Managers are getting lost when the conversation is mantained about 300 sec of duration, and finally the CM sends a RST packet.
Could be this a bug in the H323 inspection rule?
Regards,
ā03-02-2010 06:10 AM
If the ASA is dropping keepalives then it could be a defect.
I haven't seen something like that in 8.2.1 though.
"sh service-policy" will show you if the h323 inspection has any drops though.
I hope it helps.
PK
ā03-02-2010 10:47 AM
http://cdetsweb-prd.cisco.com/apps/goto?identifier=CSCsy30717
CSCsy30717 Keepalive not processed correctly thru TCP Proxy
Resolved in 8.2.1(10)
Symptom:
TCP Keep Alives between h323 endpoints are not processed correctly by the ASA.
Workaround:
None
-KS
ā03-03-2010 01:29 AM
Hi to all
Thank you! you're very kind! I'm going to download 8.2.1(10) an schedule an upgrade. If this solve the problem I'll notice that to all.
Cheers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide