Solved: IOS XR Interface up/down trap

Atif Siddiqui · ‎02-23-2010

For interface up/down trap

In IOS it used to be:

Generic: 2; Specific: 0; Enterprise: .1.3.6.1.6.3.1.1.5;

Variables:

[1] mgmt.mib-2.interfaces.ifTable.ifEntry.ifIndex.34 (Integer): 34

[2] mgmt.mib-2.interfaces.ifTable.ifEntry.ifDescr.34 (OctetString): POS2/1/0

[3] mgmt.mib-2.interfaces.ifTable.ifEntry.ifType.34 (Integer): 171

[4] private.enterprises.cisco.local.linterfaces.lifTable.lifEntry.locIfReason.34 (OctetString): Keepalive failed

Annotations:

In IOS XR we are missing ifDescr

Joe Clarke · ‎02-24-2010

Try doing:

no snmp-server trap link ietf

View solution in original post

Joe Clarke · ‎02-24-2010

IOS is using a custom linkDown trap which includes ifDescr. The IETF linkUp/linkDown traps do not include this varbind. I do not have an IOS-XR device with which to test, but from what I've seen IOS-XR can send the same traps that IOS sends. What version of XR do you have? What does your config look like?

Atif Siddiqui · ‎02-24-2010

Here is the config:

IOS XR version 3.6.1

snmp-server trap link ietf ---> I see this is ietf and no other choice
snmp-server host 10.10.10.40 traps admin

snmp-server host 10.11.10.40 traps admin
snmp-server view N ip included
snmp-server view N ifMIB included
snmp-server view N system included
snmp-server view N cpwVcMIB included
snmp-server view N entityMIB included
snmp-server view N interfaces included
snmp-server view N cpwVcMplsMIB included
snmp-server view N ciscoCBQosMIB included
snmp-server view N ciscoPingEntry included
snmp-server view N ciscoProcessMIB included
snmp-server view N ciscoMemoryPoolEntry included
snmp-server view N ciscoEnhancedMemPoolMIB included
snmp-server community admin RO N-SNMP-ACL
snmp-server traps snmp
snmp-server traps config
snmp-server traps entity
snmp-server location X
snmp-server trap-source MgmtEth0/8/CPU0/0

Joe Clarke · ‎02-24-2010

Try doing:

no snmp-server trap link ietf

Atif Siddiqui · ‎02-25-2010

Thanks Joe.

This solves the problem.

One more question. we do not see LDP traps coming from the XR router.

here is the config; when i enable LDP traps it just does not show up in the config:

snmp-server host 10.10.141.253 traps ovadmin
snmp-server view N ip included
snmp-server view N system included
snmp-server view N cpwVcMIB included
snmp-server view N entityMIB included
snmp-server view N interfaces included
snmp-server view N cpwVcMplsMIB included
snmp-server view N mplsTeStdMIB included
snmp-server view N ciscoCBQosMIB included
snmp-server view N ciscoPingEntry included
snmp-server view N ciscoProcessMIB included
snmp-server view N ciscoMemoryPoolEntry included
snmp-server view N ciscoEnhancedMemPoolMIB included
snmp-server community admin RO
snmp-server community admirw RW
snmp-server traps snmp
snmp-server traps config
snmp-server traps entity
snmp-server location Y

snmp-server trap-source MgmtEth0/8/CPU0/0

Tried to enable it:

RP/0/8/CPU0:P1(config)#snmp-server traps mpls ?
frr          Enable MPLS FRR traps
l3vpn        Enable MPLS L3VPN traps
ldp          Enable MPLS LDP traps
traffic-eng Enable MPLS TE traps
RP/0/8/CPU0:P1(config)#snmp-server traps mpls ldp ?
down       Enable MPLS LDP session down traps
threshold Enable MPLS LDP threshold traps
up         Enable MPLS LDP session up traps
RP/0/8/CPU0:P1(config)#snmp-server traps mpls ldp ?
down       Enable MPLS LDP session down traps
threshold Enable MPLS LDP threshold traps
up         Enable MPLS LDP session up traps
RP/0/8/CPU0:P1(config)#snmp-server traps mpls ldp down ?

RP/0/8/CPU0:P1(config)#snmp-server traps mpls ldp down
RP/0/8/CPU0:P1(config)#snmp-server traps mpls ldp up
RP/0/8/CPU0:P1(config)#commit
RP/0/8/CPU0:P1(config)#end

does not show up in the config.

Atif Siddiqui · ‎02-25-2010

Does this discussion say anything about this. LDP traps being sent label switched: not sure:

https://supportforums.cisco.com/message/974282

Joe Clarke · ‎02-25-2010

I do not think this thread is applicable since you appear to be seeing other traps, and you are specifying what is probably the correct trap source interface. I don't see any known bugs affecting LDP traps, and as I said before, I am unable to test locally. I can say your config (at least SNMP-wise) does look correct.