CME7 Extension Mobility Config

Answered Question
Feb 24th, 2010

Hi,


im trying to configure extension mobility in cme 7 but i dont understand what a few of the parameters are that are shown in the cme admin guide. where alot of them are said to be optional and i dont configure them, the system doesnt work???


would it be ok if someone could please help me. check my config and give me some advice on tidying up my config please?


also, when i assign a seconf number to the second line on a users EM profile it doesnt appear on the phone?


and, can someone please explain how i would configure "dummy DN's" on the IP phones when they are logged out?


any advice would be appreciated.



many thanks

Dimitri

Attachment: 
Correct Answer by Hythim Ali El Hadad about 6 years 12 months ago

Hi,


Kindly find it below:



=====================================



voice logout-profile 2
number 5003 type normal



ephone  1

logout-profile 2

ephone  2

logout-profile 2

ephone  3

logout-profile 2

.

.

.

.

..

.

.

ephone  40

logout-profile 2


========================================




Like this you'll have the DN 5003 on the 40-ephones




Wish this be helpfull

Please rate successfull posts




Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
Hythim Ali El Hadad Mon, 03/01/2010 - 16:10

Hi,


The phone DNs when logged out will use the DN configured under voice logout profile and when logged in, the phone will use the user profile DNs



Wish this be helpful



Thanks

dnicolaides Tue, 03/02/2010 - 00:57

thanks for that.


so does that mean that if i have 40 physical IP Phones i must configure 40 voice logout-profiles and assign each voice logout-profile to a physical IP phone?


can i not have only 1 voice logout-profile with 40 DN's and they automatically get assigned to a phone?


thanks

Dimitri

Hythim Ali El Hadad Tue, 03/02/2010 - 02:06

Hi,


Good thinking


Yes you can use the same logout profile for more than one phone


No need to create a 40 logout profile for each 40 phone



Wish this be helpful



thanks

dnicolaides Tue, 03/02/2010 - 02:08

thats great news. thank you.


would it be possible for you to show me an example config for the voice logout profile with 40 DN's please?




Dimitri

Correct Answer
Hythim Ali El Hadad Tue, 03/02/2010 - 05:43

Hi,


Kindly find it below:



=====================================



voice logout-profile 2
number 5003 type normal



ephone  1

logout-profile 2

ephone  2

logout-profile 2

ephone  3

logout-profile 2

.

.

.

.

..

.

.

ephone  40

logout-profile 2


========================================




Like this you'll have the DN 5003 on the 40-ephones




Wish this be helpfull

Please rate successfull posts




Thanks

Actions

This Discussion